Adiabatic humidifiers for effective irrigation

Adiabatic humidifiers

Humidifier capacity for steam preparation up to 5500 kg / h.
Measurement accuracy - +/- 3%.

Hygiene certificate VDI 6022;

Compact control
• Thanks to the control panel it is easy to set the capacity, humidity level in the premises;
• Control protocols Modbus, BACnet, LonTalk;
• Easy to use menu;
• Online access to all features;

  • Patented multi-stage system controlled by the Vapor-logic® controller: Continuous operation is ensured by a multi-stage system, because when one stage is in drying mode, the other stages remain active.
  • Low energy consumption: Each stage has its own pump, and each of these pumps only runs when water is needed for that stage (up to three stages in each system).
  • Reduces the cooling load: each liter of water evaporated into the air removes about 2250 kJ of heat from the air. This evaporative cooling effect reduces the cooling load on the building, resulting in significant energy savings when both cooling and irrigation are required.
  • Integrated drip trap: Order a system with a built-in drip trap to remove water droplets that can form when working at higher face speeds. The ability to operate at higher speeds provides more conditioned air to the controlled space.
  • Adiabatic humidifiers have a controlled version: The user-operated Wetted Media System does not have a DriSteem Vapor-logic® controller, which saves costs while maintaining flexibility when working with an existing building automation system.

Important for system operation
• Supply water pressure from 170 to 550 kPa;
• Manual shut-off valve recommended;
• Water quality requirements - reverse osmosis, deionized or tap water;
• Recommended water pressure gauge 830kPa;

As professionals in our field, we are principled - hearing the needs of the Customer, if we see other possibilities of ordering solutions, we always offer long-term service, the highest quality and the most suitable device for you. Contact us!

More humidification equipment

Individual solutions tailored to the customer's needs.
20 years of work experience. A team of professionals.
Reliable products for indoor microclimate. Exclusive range.
Extremely wide profile projects. Efficiency and flexibility.


Ventilation is necessary to constantly add oxygen to the indoor air, reduce the concentration of carbon dioxide (CO2), ensure the required relative humidity and remove air pollutants. According to Dr. Dr. Harvard University. According to Joseph Allen, an effective ventilation system and disinfection of the circulating air is one of the means of preventing viruses.
When installing a recuperation system, there are details of things that a non-professional may not know, things that may go unnoticed. So there is a high probability that the result will not be happy, so you will have to turn to professionals. Timely advice and assistance can help avoid unnecessary investments, and the solution chosen will ensure a comfortable climate and proportionate operating costs for the system.
The buildings are airtight, the humidity outside is very low in winter, so when the heating starts, the relative humidity of the indoor air is usually less than 30%. Then the nasal and eye mucosa dries out, the skin dries out, the resistance to viral and bacterial diseases decreases, allergic reactions become more active and people's ability to work decreases. In rooms where irrigation equipment is installed and 45 percent is maintained. humidity level, viruses spread four times slower than in rooms without irrigation and 30% humidity. The correct relative humidity maintains a moist, undamaged mucous membrane and is a prevention of the establishment of viruses, bacteria and other pathogens in the mucous membranes. It is necessary to mention that proper irrigation is necessary for the storage and exposition of works of art, in industry, medical clinics and hospitals, laboratories.
The most direct way to a quick and efficient solution is to contact our engineers. Proper selection of a humidifier requires not only engineering knowledge, but also to capture the parameters or other data, so it is best to consult a professional.
In winter, the room temperature is +22 (possible error 2 degrees) and the humidity is 40-60 percent.
Maximum workability is achieved when the indoor temperature in winter reaches +22 C (possible 2 degree error and humidity 40-60%. In summer season - temperature + 23 C (error 1.5 degrees) and humidity within 40-60%.
To ensure maximum efficiency, the air in the ventilation system must be properly prepared: heated and humidified in winter and cooled and dehumidified in summer according to the specified parameters. Also in the ventilation system, the air must be distributed appropriately according to the work premises, taking into account their size, etc. important parameters.
Flushing is high humidity and high temperature, stuffy rooms can be uncomfortable, so there are several solutions. Temperature and humidity or one of these parameters can be reduced.
There is a "lack of air" in the room due to too high a concentration of carbon dioxide (CO2) and more fresh air or too high a temperature and high humidity.
Indoor air is dry because the humidity outside is significantly lower than in summer, and even when the air is warm, the relative humidity in the room is lower than 30 percent. For this reason, we have the so-called dry air effect. The solution is a humidifier. Although they are varied, the best advice will be given by a professional, as it is necessary not only to address the issue of humidification, but also to ensure that excessive humidity does not cause more trouble than benefit later.

Related Articles


With the rise of coronavirus and the increasing incidence of influenza and acute upper…


There has been ample evidence in recent decades that people…


With the rise of coronavirus and the rising incidence of influenza and acute upper respiratory infections, we each need to pay special attention [RS1] not only to strengthening immunity, personal hygiene and protection, but also to cleaning indoor air and surface disinfection to protect against airborne viruses. The most effective way is ozonation. What is ozone, what are its beneficial properties and […]